Is KJ Export an authorized RAEL distributor?

Yes. KJ Export has been the exclusive agent of RAEL Motori Elettrici for the Middle East since 2010.

Where are RAEL motors made?

RAEL motors are made at the RAEL factory in Predosa, Italy.

Do you supply genuine RAEL spare parts?

Yes. We supply original RAEL spare parts, so the Ex certification of the motor stays valid after repair. Send us the motor type and RAEL code from the nameplate.

My RAEL motor is an old model. Can you still replace it?

Yes. Send us a photo of the nameplate. If the model is no longer produced, we propose the current RAEL equivalent with the same frame, mounting and Ex protection.

Which RAEL series do I need?

RL for general flameproof duty, Tube for axial fans, ADPE for fuel dispensers, MIA for Ex e in Zone 1 and MIA1 for Zone 2. If you are not sure, send us the application and area classification.

RAEL Motors – Exclusive Middle East Distributor

RAEL Motori Elettrici is an Italian manufacturer of ATEX and IECEx explosion-proof electric motors for oil and gas, petrochemical, fuel and process plants. KJ Export has been RAEL’s exclusive agent for the Middle East since 2010, supplying the full RAEL range from Dubai to the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain and Iraq.

Made in ItalyATEX, IECEx, EAC, UKCA

0.035 – 18.5 kWIEC frame 56 – 160

Ex db · Ex eb · Ex ecflameproof, increased safety, non-sparking

IIC · T4 – T6gas Zone 1 / 2, dust Zone 21 / 22

50 / 60 HzGulf voltages on request

IP66against sand and dust

Request a quote WhatsApp +971 50 269 7191

RAEL motor series

RAEL RL series three-phase flameproof explosion-proof motor

RL series – Ex db

Flameproof motors, frame 56–160, IIC / IIB. Three-phase, single-phase, two-speed and BrakEx brake motors.

RL series and model list

RAEL Tube explosion-proof motor for axial fans

Tube – axial fans

Flameproof Ex db IIC motors for axial and duct fans, 36–38% lower profile than RL, rear terminal box, frame 56–71.

Tube series

RAEL ADPE explosion-proof motor for fuel dispensers

ADPE – fuel dispensers

Motors for fuel dispensers and vapour recovery pumps, V80 and V90, single and three-phase, 0.25–2.2 kW.

ADPE series

MIA / MIA1 – Ex eb, Ex ec

Increased safety (Zone 1) and non-sparking (Zone 2) motors, 0.06–18.5 kW, up to 39% lighter than Ex d.

MIA and MIA1

RAEL series compared

Series	Protection	Gas group	Frame	Versions	Key feature
RL	Ex db / Ex db eb · Ex tb	IIC, IIB	56 – 160	Three-phase, single-phase, two-speed, BrakEx brake	The core flameproof range
Tube	Ex db / Ex db eb · Ex tb	IIC	56 – 71	Three-phase, single-phase	36–38% lower profile, rear terminal box
ADPE	Ex db	IIB, T3 / T4	V80, V90	Three-phase, single-phase, 0.25–2.2 kW	Most ratings dual 50 / 60 Hz
MIA	Ex eb · Ex tb	IIC	56 – 160	One and two speeds, inverter duty	Zone 1, up to 39% lighter than Ex d
MIA1	Ex ec · Ex tc	IIC	56 – 160	One and two speeds, inverter duty	Zone 2, non-sparking

Choosing by application (pumps, fans, fuel dispensers, hoists)? See how to choose an explosion-proof motor, or send us your area classification.

How to read a RAEL type designation

A RAEL motor type such as RL 90 L-2 tells you the series, the IEC frame and the number of poles:

Part	Example	Meaning
Series	RL · TUBE · MIA	Motor family and type of protection
Frame size	90	IEC shaft height in mm (56 to 160)
Frame length	L	Stator length within the frame (S, M, L, A, B…)
Poles	-2	2 poles ≈ 3000 rpm, 4 ≈ 1500, 6 ≈ 1000, 8 ≈ 750 rpm at 50 Hz

When you order a replacement, send us the full type and the RAEL code from the nameplate. A photo of the nameplate is the fastest way to get an exact quotation.

Why buy RAEL through KJ Export

Exclusive Middle East agent since 2010 – a direct line to the RAEL factory in Predosa, Italy.
Genuine RAEL spare parts – so the Ex certification of your motor stays valid after repair.
Certificates for your project – ATEX and IECEx, plus EAC and UKCA.
Nameplate identification – send a photo of an installed RAEL motor and we find the exact model or its current equivalent.

Countries we supply

United Arab Emirates
Saudi Arabia
Qatar
Oman
Kuwait
Bahrain
Iraq

Frequently asked questions

Is KJ Export an authorized RAEL distributor?: Yes. KJ Export has been the exclusive agent of RAEL Motori Elettrici for the Middle East since 2010.
Where are RAEL motors made?: RAEL motors are made at the RAEL factory in Predosa, Italy.
Do you supply genuine RAEL spare parts?: Yes. We supply original RAEL spare parts, so the Ex certification of the motor stays valid after repair. Send us the motor type and RAEL code from the nameplate.
My RAEL motor is an old model. Can you still replace it?: Yes. Send us a photo of the nameplate. If the model is no longer produced, we propose the current RAEL equivalent with the same frame, mounting and Ex protection.
Which RAEL series do I need?: RL for general flameproof duty, Tube for axial fans, ADPE for fuel dispensers, MIA for Ex e in Zone 1 and MIA1 for Zone 2. If you are not sure, send us the application and area classification.

KJ Export is the independent exclusive distributor of RAEL in the Middle East. For information about the manufacturer, visit raelsrl.com.

Need RAEL motors in the Middle East?

Send us the RAEL code, the nameplate photo or your Ex specification and we will reply with a quotation.

sales@kjexport.com WhatsApp +971 50 269 7191

RAEL Motors – Exclusive Middle East Distributor